General pigment paste for coatings (wide compatibility, good brightness, high saturation)

1. General colorant for solvent-based coatings, with A81 aldehydes and ketones as the carrier, suitable for all solvent-based coatings in the mainstream of the market, can be used in some water-soluble system coating oil to water system containing environmentally friendly solvents (pure water is not applicable), can be used in dispensers, refined by selected high-quality pigments and dispersants at home and abroad, with bright colors and high coverage, and a highly transparent series has been specially developed, with stable temperature resistance of 180 degrees Celsius within 30 minutes, no color change, not easy to float, and no migration. The product does not contain heavy metals, meets environmental protection requirements (except for inorganic chromium yellow, molybdenum chromium red, specially marked), does not contain plasticizers, and conforms to EU standards such as ROHS ROHS2.0 EN71-3. The marked grades are the common grades of the pigments used.

 Introduction to our featured products:

FLTY-1000 has a fineness of 800 nanometers, which can make the paint have better leveling, higher gloss and high cost performance.

FLTY-1007 has no resin carrier, wider compatibility, and better hiding power with 27% carbon black content.

FLTY-1009 acrylic resin carrier black, with good heat resistance, suitable for acrylic paint, high Zegao, good heat resistance.

FLTY-1300 Special 6 Carbon Black is a pigment that presents a pure blue black effect.

FLTY-902H High Opacity White uses DuPont 902 titanium dioxide as the pigment content of 75%, high whiteness and hiding power.

FLTY-706H high-temperature white is made of DuPont 706 titanium dioxide as the pigment content is 75%, and the carrier is polyester resin, which has excellent heat resistance and can withstand high temperature of 200 degrees.

FLTY-2800 is golden, presenting a vivid goldfish yellow effect, hiding power, and outdoor lightfastness has also reached level 7 for more than two years.

FLTY-2900 is super weather-resistant red-phase yellow, and the current measured saturated color (dark color) outdoor light resistance can reach more than 5 years.

FLTY-3700 is truly made of Clariant F3RK pigment, with high brightness, pure color and light, and more than two years of outdoor light resistance.

FLTY-3800 uses high weather-resistant tensile red pigment (D3G) for outdoor sunlight resistance for more than 5 years.

FLTY-5200 Rosé uses Clariant's PINKE pigments, which have excellent solvent resistance, no migration and no color fading.

FLTY-2817 is transparent iron red, the pigment fineness is 300nm, and the high transparency effect is suitable for making champagne gold paint.

FLTY-1916 is transparent iron yellow, the pigment fineness is 300nm, and the high transparency effect is suitable for making lapis gold coatings.

FLTY-3100 fresh orange, high color, high saturation, suitable for paint and color mixing, good brightness. High chroma.

Among them, the following three products are non-environmentally friendly colorants, please pay special attention (the following three non-environmental protection products are retained due to the coating of engineering equipment and special environmental needs)

FLTY-618H inorganic medium chromium yellow, cost-effective, suitable for engineering equipment coatings, leaded chromium

FLTY-811 lemon chrome yellow, cost-effective, much better lightfastness than organic lemon yellow, containing lead chromium

FLTY-8000 molybdenum chromium red, inorganic pigment orange, lightfastness up to grade 8, outdoor 5 years without fading, containing molybdenum, chromium, lead